furnace repair

Moline is Getting Cold, but My Furnace Wont Turn On

Fixing your furnace might feel like a daunting task when your heat won’t start. But it doesn’t have to be like that.

There are a couple of quick, reasonable fixes you can do by yourself to avoid a furnace repair call.

If your furnace won’t turn on, won’t stay on or won’t ignite, try the troubleshooting list below before getting in touch with an HVAC professional.

If you find you need help from someone who is experienced and live in Moline, J.L. Brady Company LLC can provide assistance to you. We work on most makes of heating systems.

If you need a new heating system, we also do furnace replacement in Moline.

While you’re talking with us, think over a routine furnace maintenance plan from J.L. Brady Company LLC that could help you avoid breakdowns in the future. We can tell you how regularly your furnace should be checked by one of our NATE-certified experts.

Follow our easy guide below to get to work on troubleshooting your furnace. Most of these steps don’t require mechanical abilities.

Steps for Furnace Troubleshooting

Check the Thermostat

To start, make sure your thermostat is telling your furnace to turn on.

If you have a digital thermostat:

  • Replace the batteries if the screen is blank. If the digital screen is jumbled, the thermostat may need to be replaced.
  • Make sure the switch is set to “heat” as opposed to “off” or “cool.”
  • Ensure the program is displaying the appropriate day and time and is set to “run.” If you’re having a hard time overriding the program, set the temperature by using the up/down arrows and press the “hold” button. This will make the furnace to ignite if thermostat programming is causing a problem.
  • Increase the temperature setting to 5 degrees warmer than the room temperature.
Digital Thermostat

If your furnace hasn’t kicked on within few minutes, make sure it has power by toggling the fan switch from “auto” to “on.” If the fan doesn’t start, your furnace may not have power.

If you have a smart thermostat—like one made by Nest, Ecobee, Lux, Honeywell or Bosch—troubleshooting is very model-specific. Refer to the manufacturer’s website for help. If you still can’t get your Wi-Fi thermostat to work, contact us for assistance.

Lennox Smart Thermostat

Examine Breakers and Switches

Next, you will need to check if your breaker and furnace switch are on.

  • Find your house’s main electrical panel. If you aren’t sure where it is, look for a gray metal box in your basement, garage or closet.
  • Make sure your hands and feet are dry before touching the panel or breakers.
  • Find the breaker labeled “furnace” or “heat,” and make sure it’s switched “on.” If the breaker has tripped, it will be in the middle or “off” position.
  • Using one hand, firmly switch the breaker to the “on” position. If the breaker immediately trips and pops back to “off,” don’t touch it and call a professional from J.L. Brady Company LLC at 309-517-7511 right away.

No matter your furnace’s age or brand, it has at least one standard wall switch located on or close to it.

  • Make sure the switch is flipped up in the “on” position. If it was turned off, it could take your furnace up to five minutes to start. (If you don’t know where to find your furnace, take a look at your basement, garage or utility closet. It could also be in a crawl space or attic.)

Replace Your Furnace’s Air Filter

When it comes to furnace problems, a filthy, clogged air filter is frequently the top offender.

If your filter is too dirty:

  • Your furnace won’t keep heating your home, or it could overheat from reduced airflow.
  • Your energy bills could be higher because your furnace is turning on more than it should.
  • Your furnace could stop working sooner than it should because a dirty filter causes it to overwork.
  • Your furnace can be disconnected from power if an overly dirty filter causes the breaker to trip.

Depending on what make of furnace you use, your air filter is located inside the blower compartment of your furnace, an attached filter case or wall-mounted return air grille.

Replacing a furnace filter

To replace your filter:

  • Turn off your furnace.
  • Remove the filter and hold it up to the light. If you can’t see light through it, get a new one.
  • Install the new filter with the arrow pointing toward the furnace to avoid damage.

Flat filters should be replaced every month, while pleated filters should last about three months. You can also buy a washable filter that will last about 10 years. If you have children or pets, you may have to replace your filter more frequently.

To make the process smoother in the future, use a permanent marker on your furnace housing or ductwork to show the airflow direction and filter size.

Examine the Condensate Pan

Also known as drain pans, condensate pans hold water your furnace pulls from the air.

If water is seeping out of your furnace or its pan has standing water in it, follow these steps.

  • If your pan has a drain (look for a PVC pipe), check that it isn’t full. If it needs to be drained, use a special pan-cleaning tablet you can get at home improvement or hardware stores.
  • If your pan uses a pump, take a look at the float switch. If the switch is stuck “up” with standing water in the pan, contact J.L. Brady Company LLC at 309-517-7511, because you will possibly need a new pump.

Peek Inside Your Furnace

If malfunctions continue, peek inside your furnace’s plastic window to check the status of the blower motor. Depending on the model, the light could also be attached on the outside of your furnace.

If you see anything else besides a steady, colored light or blinking green light, call J.L. Brady Company LLC at 309-517-7511. Your furnace may be emitting an error code that requires professional assistance.

Clean the Flame Sensor

If your furnace tries to start but turns off without distributing heat, a dirty flame sensor could be at fault. When this occurs, your furnace will attempt to ignite three times before a safety feature shuts it down for about an hour.

If you feel comfortable with opening up your furnace, cleaning your flame sensor is something you can do by yourself. Or, one of our HVAC experts at J.L. Brady Company LLC can do it for you.

If you want to clean the sensor yourself, you’ll need:

  • A 1/4” hex screwdriver or wrench
  • Piece of light grit sandpaper, steel wool or emery cloth
  • A dry, clean paper towel

Next:

  • Turn off the furnace’s power by using its wall switch or breaker. If your gas valve is not electric, you will need to shut off the gas as well.
  • Remove the furnace’s front panel and follow the wire to the flame sensor.
  • Unscrew the rod and use your sandpaper, steel wool or emery cloth to carefully rub the metal rod.
  • Wipe off the rod with a paper towel.
  • Remount the sensor.
  • Replace the furnace doors.
  • Turn the furnace’s power back on. It could proceed through a set of checks before resuming normal operation. If your furnace doesn’t start, the sensor may need to be replaced or something else may be wrong. If this happens, contact J.L. Brady Company LLC at 309-517-7511 for assistance.

Relight the Pilot Light

If you own an older furnace, the pilot light could be turned off. To relight it, find the instructions on a label on your furnace, or follow these steps.

  • Locate the switch on the bottom of your furnace labeled “pilot,” “on” and “off.”
  • Turn the switch to the “off” position.
  • Wait at least five minutes to avoid possibly creating a fire.
  • Turn the knob to “pilot.”
  • Press the “reset” button as you bring the flame of a long lighter to the pilot light opening.
  • Release the “reset” button once the pilot light is lit.

If you have followed the instructions twice and the pilot light still won’t light or stay lit, call J.L. Brady Company LLC at 309-517-7511.

Check Your Fuel Source

Try using another gas appliance. If it doesn’t work, your natural gas service could be turned off, or you could be out of propane.

J.L. Brady Company LLC Can Help with Furnace Problems

Followed our troubleshooting guide but your furnace still won’t work?

Call us today at 309-517-7511 or use our online scheduler. We’ll come out and diagnose the problem.

*Required fields